HOMOLOGATION
1. HOW ARE HELMETS RATED?
Stilo helmets are certified to FIA 8860, FIA 8859, Snell SA2020, Snell K2020 and Snell CMR2016.
The most current Snell rating is SA2020. SA stands for Special Application. SA-rated helmets are used in competitive automobile racing and require a fire-retardant rating.
K- and CMR-rated helmets are used for karting applications and are not required to be fire retardant.
2. WHERE CAN I FIND THE FIA OR SNELL HOMOLOGATION ON MY HELMET?
The homologation labels are located under the helmet padding usually in the nape area or outside of the helmet always in the nape area. Please remeber that removing the label will void the homologation.
3. DID YOU CHECK YOUR HELMET HOMOLOGATION?
Do you know that end of 2023, for FIA competitions, helmets with the following homologations are not longer valid ?
all helmets bearing the FIA label = FIA 8858-2002
all helmets bearing the FIA label = FIA 8858-2010
all helmets bearing any SNELL label without FIA label
Please check your helmet homologation before registering for each race or championship.
FITTING
4. HOW TO CHOOSE THE RIGHT SIZE FOR YOUR STILO HELMET? OR HOW DO I MEASURE MY HEAD FOR A HELMET?
It is always essential to try the helmet before purchasing it. The helmet size corresponds to the circumference measurement (expressed in centimeters) of the head. Measure the circumference with a cloth tape measure : measure the head at its widest part, above the eyebrows and ears (we can add an figure). If you’ll be wearing a Balaclava, you should measure your head while wearing it. The helmet must fit snugly, but without putting pressure on it. When you shake your head the helmet must remain firmly in place. The helmet worn must not be able to rotate around the head. When the throat strap is fastened it must be impossible to take off the helmet; if this happens the helmet size is not the correct one.
5. HOW SHOULD MY STILO HELMET FIT?
Your helmet should fit tightly to your head without being uncomfortable. It should be well-seated at the crown and you should feel contact with even pressure around your head. Cheek and ear areas can be custom fitted.
6. HOW TO WEAR YOUR STILO HELMET CORRECTLY?
Grasp the helmet by the two edges of the strap keeping the strap wide apart. If the helmet is equipped with ear cups, check their correct positioning. Slide the helmet over your head. Check that the strap cover is positioned correctly.
7. WHERE CAN I FIND THE SIZE OF MY STILO HELMET?
There is a size label into the back of the helmet’s interior fit pad. To find this label, lift the interior padding at the back of the helmet and look on the foam side of the fit pad.
8. WHY YOUR STILO HELMET MUST FIT PERFECTLY?
If your helmet fits perfectly, it will be not only more comfortable but it will work better by protecting your head. The fitting plays an important role.
HANS AND HYBRID
9. DOES STILO INSTALL HEAD RESTRAINT ANCHORS ON ITS HELMETS?
Yes. We install head restraint anchors on full-face helmets. Please order at time of purchase. An installation fee will apply.
10. DOES STILO HELMET WORK WITH HEAD AND RESTRAINT DEVICES?
Stilo full-face helmets are homologated to Snell SA 2015, SFI 24.1 Youth, FIA8859 or FIA8860 are produced with M6 terminal hardware incorporated into the helmet shell and certified for use with approved head and neck restraint devices. Models designed specifically for karting will not include M6 terminals and are not appropriate for head and neck devices. Pls contact us in order to confirm the anchor system required for the head and neck restraint.
11. WHERE CAN I BUY MY HANS OR HYBRID DEVICE?
If you are an US customer pls refer to our website…….If you leave in Europe or pls find the official dealer nearest to you.
12. CAN I MODIFY MY STILO HELMET?
No helmet should be modified to the specifications to which it was manufactured. It is highly risky to modify the helmet, as this could reduce its protective capacity. For safety reasons, do not puncture, press or cut the cushioning layer. Use only original SӀlo spare parts to replace helmet components.
Stilo declines any responsibility in relation to work carried out on the product by any third party.
MAINTENANCE
13. HOW TO CLEAN YOUR STILO HELMET?
The internal lining can be cleaned by rubbing generally with a damp microfibre cloth, possibly using a delicate neutral soap and warm water, leave the helmet to dry at room temperature, do not use a hairdryer or heat source other than the Multi Equipment Dryer.
Exposure to temperatures above 140 degrees Fahrenheit or 60 degrees Celsius may cause damage to internal parts, resulting in leakage of the protective capabilities of the helmet. Do not use substances such as petrol, paint or cleaning materials, these could damage the helmet without the damage being visible to the user.
14. HOW DO I CLEAN THE COVERS ON MY REMOVABLE LINER?
Hand wash, dampen with a towel and then air dry is a great way of keep your lining clean and fresh.
15. HOW DO I CLEAN MY STILO VISOR?
For visors with Antifog, only use the appropriate cleaner (YA0640). Do not use water-based products to clean the internal surface of the visor. The use of products other than those recommended may damage the the structure of the visor itself.
16. HOW CAN I PROPERLY STORE MY STILO HELMET?
Your helmet should be cleaned using water and mild soap, thoroughly air dried and then stored in the original helmet bag. Always store in a well vented, dry environment away from strong chemicals and fuel.
SPARE PARTS
17. IF I NEED TO REPLACE A BROKEN/MISSING COMPONENT ON MY HELMET, WHERE CAN I GET THIS FROM?
First of all, please check the part number of the component you need. This will make ordering the correct part much easier. Pls check the list of our Official Dealer on our website xxxxxxx
18. HOW OLD MY STILO HELMET IS ? HOW DO I FIND OUT THE AGE OF MY STILO HELMET?
There are several ways to determine the production date of the helmet:
19. HOW MUCH UV PROTECTION DO THE STILO VISORS PROVIDE?
The material used for our visors filters various amounts of light. Our "dark" visors filter 70% of the UV light where the Medium Filters 50%.
20. WHERE STILO HELMETS ARE PRODUCED?
Stilo helmets are designed, developed, prototyped, tested and produced in Italy with a KM 0 philosophy, 100% made in Italy. Each Stilo helmet is fully hand-made by specialised workers in Bergamo, starting from the shell and all the way down to the labelling of the helmet before shipping. Every step of the production procedures is prepared with the utmost care and strict quality controls are in place before and during the whole process. All of this to offer the safest helmets, with accessories, features and functionalities that make sure our products are a perfect fit for each seat.
21. WHY STILO?
The name Stilo comes from the tool used by the Bronze Age to write, to imprint the first thoughts, the first ideas, the first concepts. In time the word “stilo” evolved in “style”, that is the way each person uses a Stilo helmet: your own style. And our style is that of making products that leave a mark, exactly like a stilo in our ancestors wax boards.
STILO WARRANTY
22. WHO IS RESPONSIBLE FOR THE WARRANTY ON MY HELMET?
The dealer you purchased your helmet is responsible for the warranty. If you buy an helmet from a dealer and your helmet is not ok in terms of quality or doesn’t match the description you can return the item to the dealer you purchased your helmet from. This also applies to helmets bought in another country.
23. I PURCHASED MY HELMETS IN ANOTHER COUNTRY, HOW DO I CLAIM WARRANTY?
You will need to contact the dealer you purchased the helmet from. If you received your helmet as a gift, as long as you have the original proof of purchase, invoice or warranty card you can claim for the warranty.
24. HOW LONG RUNS THE WARRANTY ON MY STILO HELMET?
The warranty runs X years from the date of purchase. Stilo warranties all products when used according to manufacturer instructions. This warranty does not include damage as a result of misuse, abuse or normal wear and tear.
25. HOW TO DISPOSE OF YOUR STILO AT THE END OF ITS LIFE?
All Stilo helmets are made of composite materials that are difficult to dispose of and recycle properly. If your helmet has reached 5 years of use or has suffered a collision/accident, we recommend placing it in undifferentiated waste collection or taking it to a specialized disposal centre.
26. WHEN SHOULD I REPLACE MY HELMET?
Stilo recommends to replace your helmet every three-five years depending on the use. If the helmet had been involved in an accident, it should be inspected carefully by a professional and replaced if there are any signs of shell delamination or cracking or liner compression.
27. DOES STILO PROVIDE A SERVICE FOR TESTING MY HELMET IF I HAVE CRASHED IN IT?
In case of external and surface damage Stilo always suggests you to replace the helmet. However in case of accident, the inside component of the helmet, the EPS polystyrene liner, could be damaged due to the energy absorbed during the impact: in this case replace your helmet or buy a new one!